Manufacturers

Kyoritsu 8115 AC/DC Clamp Sensor

  • Model: KE 8115
  • Manufactured by: KYORITSU

RM1,764.00

Add to Cart:

Kyoritsu 8115 Features :

Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.

Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.

 

Kyoritsu 8115 SPECIFICATION :

 

Measuring range

AC 0.1~130Arms (185Apeak)

DC 0~±180A

Output voltage

AC 10mV/A

DC 10mV/A

Accuracy

±1.2%rdg±0.4mV (50/60Hz)
±2.5%rdg±0.4mV (40~1kHz)

±1.2%rdg±0.4mV (*)

Low battery warning

2.2V±0.2V or less - Red LED flash
(1.9V±0.2V - Automatically power off)

Conductor size

Max. Φ12mm

Withstand voltage

AC 3540V (RMS 50/60Hz) for 5 sec.

Operating temperature & humidity range

-10 to 55ºC, relative humidity 85% or less (no condensation)

Output impedance

Approx. 10Ω or less

Applicable standards

IEC 61010-1 CAT.III 300V Pollution degree 2,
IEC 61010-2-032, IEC 61326-1

Power source

DC3V (size AAA alkaline battery LR03×2pcs)
* Continuous use: approx. 40 hours
(Auto power off: approx. 20 minutes)

Cord length

Approx. 1,200mm

Output connector

Φ4mm banana plug

Dimensions

127(L)×42(W)×22(D) mm

Weight

Approx. 140g

Accessories

Soft case, LR03×2, Instruction manual

*

This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.

This product was added to our catalog on Wednesday 01 October, 2014.

Who's Online

There currently are 148 guests online.
Your IP Address is: 3.144.39.97
Copyright © 2024 Techno Tools*** About Us***mobile link***Desktop link