Solvent free industrial quality floor paint. Applied by roller as a one-coat system, to provide traction in areas of slip hazard. Hard wearing, epoxy resin anti-slip coating suitable for use on concrete, stone, steel and wood. Coverage: 5m2 per pack. Application: A pile-type roller (not foam) should be used to apply the mixed resin and curing agent which should be poured into a shallow roller tray. Apply by roller to a measured area of 5m2. Immediately sprinkle the anti-slip aggregate uniformly onto the wet coat to obtain the desired finished (total or light coverage). Using the same roller, bed in and cover the aggregate. It is not normally necessary to recharge the roller unless very heavy quantities of grit have been applied. Curing Time: Curing time is affected by temperature and will be extended by low temperatures. Temperatures of 10°C and below will arrest the curing of the product. In general, once the product has been applied, a period of 12-24 hours or longer should elapse before use. Avoid washing the surface for seven days after coating.